Re: [Chrysler300] Advice on engine repair

Hi Shannon,

The engine builder you chose has a very good reputation. The description of machine work done is very detailed, and would be the same as that done by my local Mopar engine builder. From what I see, the price quoted was labor only, and was quite a deal. I think the parts price may be a little high, but 413 pistons are pretty expensive. It sounds like a misunderstanding between you both that can probably be worked out when you meet in person.

Don

From: mailto:Chrysler300-noreply@xxxxxxxxxxxxxxx

Sent: Tuesday, March 08, 2016 1:21 PM

To: Chrysler300@xxxxxxxxxxxxxxx

Subject: [Chrysler300] Advice on engine repair

I'm afraid I already know the answer here, but I'm going to ask the group for any opinions which might help.

Quite some time ago, we took our motor to a reputed old Mopar engine rebuilding specialist/machine shop for a complete and thorough rebuild. From what we could tell at the time, he had excellent credentials, was reputable, and knew what he was doing. The project was delayed initially when we discovered the engine which came with the car (300F) was not the correct year, but with kind help from Scott Tozzi and Don Verity, we managed to secure a proper, date correct engine. Now, finally, the motor is supposed to be finished, and ready to pick up.

The problem we are having is with the bill (although we don't know how the engine runs yet). We were initially quoted $3500 plus parts for a very thorough rebuild. Unfortunately, we did not get a written estimate per se, but instead he gave us a printed flyer he had which described his process and the price in great detail. It was one and a half full pages, single spaced, VERY detailed, described the whole procedure, and even discussed tolerances, etc.. Basically, it's about all you can do to a normal engine, at least from my knowledge. We didn't want any high performance mods--just a stock, very reliable motor. We did say we were OK with minor modifications to enable running on unleaded gas or to create significant improvements in reliability.

So far, we've given him $4500, and thought we were nearly paid up, but today he said the motor is ready for pickup, and he wants another $5000! We haven't seen the parts bill (I know he put in pistons, and maybe a cam, which we didn't want), but we were floored. The initial discussion started to go south over the phone, so we thought it better to go there in person to deal with it, which we plan to do on Friday. His explanation so far is that the $3500 was a special he was running at the time, but it took a lot longer than what he thought, so this is his bill.

My belief at this point is that we are getting totally ripped off, but I don't see any other choice but to pay his price and get our motor back. I suppose we would have a weak case in small claims court for the overage (I'm guessing about $3500-4000, depending on the parts cost), but otherwise I'm at a loss.

Does anyone have any better ideas than paying the "ransom?"

As an aside, can anyone tell me what a complete rebuild on a 413 from a 300F should cost? I guess if the going rate was about $9K, I wouldn't feel as bad, but that seems awfully high to me for a normal performance motor.

Any advice or thoughts would be appreciated.

Shannon
300F convertible