Re: [Chrysler300] J/K Ram car inner fenders question

["Noel Hastalis cpaviper@xxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

A friend of mine had a set of molds from which he made replacement F/G inner fender cutouts, and sold them on eBay late last year. When I saw him in AZ in January, and asked if they were sold to Sweden, he said no, that he didn’t recall the buyer’s name, but thought it was someone in the San Diego area. A buddy of mine locally here in the Chicago area has a set of those fiberglass panels on his F, and the look and fit great. 

Noel 

Sent from my iPhone

On Apr 30, 2020, at 3:13 PM, nick@xxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

  

A friend had a 300F that was missing the access panels. He made a new set by cutting out sections from a set of New Yorker inner fenders. He borrowed my access panels to form the new ones and they came out nice. Most people wouldn’t be able to tell the difference mounted in the car.  He’s since sold the car.

 

The ones for 1960-61 300s are different from other cars because of the longer wheelbase. If you could find a set of ’64 ones to borrow, you might be able to do the same thing with two sets of inner fenders.

 

Nick.

 

From: Chrysler300@xxxxxxxxxxxxxxx <Chrysler300@xxxxxxxxxxxxxxx> On Behalf Of Keith Langendorfer keith_A_Lang@xxxxxxxxx [Chrysler300]
Sent: Thursday, April 30, 2020 12:55 PM
To: Chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] J/K Ram car inner fenders question

 

 

Folks

I’ve got pretty much everything, I think, to convert my 4 speed K to the J/K rams with the exception of the inner fenders with the plates. My understanding is that the spark plugs are virtually inaccessible if you don’t have these inner fenders?

Has anyone installed the complete ram setup , including the exhaust manifolds, and still be able to reach the plugs with the non-ram inner fenders?

Alternatively, does anyone have a set of inner fenders or, at a minimum, decent access panels for a J or ram K that would work if I surgically removed enough sheet metal on my existing inner fenders to allow for attaching the access panels to roughly mimic a factory setup?

Thanks in advance,

Keith

__._,_.___

---

Posted by: Noel Hastalis <cpaviper@xxxxxxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___