Re: {Chrysler 300} Moving seat back in 300C ; seat height

[Rob Kern <robkern@xxxxxxxxxxxxx>]

I had the overstuffed seat problem with my Gary Goers seats installed by a previous owner of my C.  I replaced them with Legendary upholstery in 2008.  I sent the seat frames to them for bead blasting and painting and new burlap straps and the correct foam and they were delivered in 5 boxes!  Prior to installing the newly refurbished and upholstered seats I obtained Keith Boonstra’s seat track extender kit which could be used with power or manual seats.  It was an easy install which I performed by myself and yielded about 5 more inches of leg room.  My first drive after all was done was SO comfortable in terms of leg room, knee room, and ease of entry and exit. Prior to this exercise in”restoration” I was cramped after driving for 20 minutes and wondered about frustration levels by owners back in the day plunking down 5-6 thousand dollars for an uncomfortable seating position!  Remember these were supposedly ordered by professional athletes (perhaps gymnasts?) and wealthy people (bankers aka fat cats) back in the day!  My .02 worth!  300’ly, Rob Kern

> On May 15, 2025, at 9:20 AM, henry.schleimer@xxxxxxxxxxxxxxx wrote:
> 
> Comprehensive dimensions are given in AMA Specifications for 1957 on the Club's technical page.  Print the pages and grab a tape measure.  There are some differences between 300C and other models but doesn't mention differences between power and non-power seat.  Maybe not all variations are covered.
> 
> Henry
> 
> -----Original Message-----
> From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> On Behalf Of John Grady
> Sent: Thursday, 15 May 2025 11:04 PM
> To: chrysler 300 club <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
> Subject: {Chrysler 300} Moving seat back in 300C ; seat height
> 
> hi, all
> while I did this myself before a few times with great parts made by someone in club(?),  it was so long ago only a foggy  memory remains, —— but I do remember some floor pans had a depression where seat rail bolts , and some did not , which I believe impacted the parts used to move  it back 3-4” . Stock allows only a small amount rearward They must have dropped the seat into the pan looking for more head room? See later on. 
> That depression  also prevents just redriling  floor  as seat-rail hits the back end of it  .
> Big heads up on all this !!!! 
> having done 4-5 C-D , — upholsterers “ do you a favor “ and  tend to overstuff the  front seat , or the foam is made too thick . There is plenty of leather to do that .   This leads to a beautiful leather seat all done that has no room for your legs under the steering wheel , so you get to do it all over again , manually shaving the foam etc  
> I do not know the  correct stock dimension of seat height at front (the  seat itself ,  not off floor) but someone may measure an original ?  and I’d go and inch less actually if possible . That number and  this situation needs to be on our site? 
> This seat height thing  may be the real reason for adding depression in floor pan ?they designed the seat too tall , = no room under wheel for legs  and had 100’s of them , a large person cannot fit in the car well . 
> 
> Back to real reason for this post , does anyone still have that kit or info ? looking for one right now . Finally finishing up George  M ‘s turquoise convert . I really miss George, great guy .  He helped all who ask .. He helped me a lot .. 
> Best regards ,and thank you
> John 
> 
> 
> -- 
> For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
> --- 
> You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
> To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/5F7DD2B5-EBD9-42F6-98A6-65E08FD8CBAA%40gradyresearch.com.
> 
> -- 
> For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
> --- 
> You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
> To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/001a01dbc5a4%248aa30710%249fe91530%24%40optusnet.com.au.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/69327467-81BA-4CA1-B4FE-DE7CFFC14D69%40sbcglobal.net.