{Chrysler 300} Re: 1964 PS Pulley

[Kevin deGraauw <kdegraauw@xxxxxxxxxxx>]

About 3/4" difference in diameters. Assuming the Chrysler federal pump is used for either scenario. I have also found the pulley offset from the hub is slightly different too.

Kevin

Get Outlook for Android

---

From: 'James Douglas' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Sent: Wednesday, May 21, 2025 10:02:02 AM
To: Chrysler 300 Club <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: {Chrysler 300} 1964 PS Pulley

 

Anyone know off hand what the differences are in the pulley for the power steering pump on the A/C vs non-A/C cars?

 

Thanks, James

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB6171DB17DD071904FD60C33C939EA%40CY5PR19MB6171.namprd19.prod.outlook.com.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/IA2P220MB19885D2DCF5ACFE3543F4C45B29EA%40IA2P220MB1988.NAMP220.PROD.OUTLOOK.COM.