|
|
![](/forums/profile/get-photo.asp?memberid=9187&type=profile&rnd=115) Regular
Posts: 71
![25](http://24.154.248.16/forums/images/decorations/multiple/25.gif) ![25](http://24.154.248.16/forums/images/decorations/multiple/25.gif)
| Hi has anyone got any info on how to go about changing upper and lower control arm bushes thanks in advance Phil |
|
|
|
Expert
Posts: 2295
![2000](http://24.154.248.16/forums/images/decorations/multiple/2000.gif) ![100](http://24.154.248.16/forums/images/decorations/multiple/100.gif) ![100](http://24.154.248.16/forums/images/decorations/multiple/100.gif) ![25](http://24.154.248.16/forums/images/decorations/multiple/25.gif) ![25](http://24.154.248.16/forums/images/decorations/multiple/25.gif) ![25](http://24.154.248.16/forums/images/decorations/multiple/25.gif) Location: Eastern Iowa | Get yourself a copy of the FSM for that year.
It's all in there and can be downloaded here.....
http://www.jholst.net/300resource/index.php
|
|
|
|
![](/forums/profile/get-photo.asp?memberid=1437&type=profile&rnd=893) Expert
Posts: 3782
![2000](http://24.154.248.16/forums/images/decorations/multiple/2000.gif) ![1000](http://24.154.248.16/forums/images/decorations/multiple/1000.gif) ![500](http://24.154.248.16/forums/images/decorations/multiple/500.gif) ![100](http://24.154.248.16/forums/images/decorations/multiple/100.gif) ![100](http://24.154.248.16/forums/images/decorations/multiple/100.gif) ![25](http://24.154.248.16/forums/images/decorations/multiple/25.gif) ![25](http://24.154.248.16/forums/images/decorations/multiple/25.gif) ![25](http://24.154.248.16/forums/images/decorations/multiple/25.gif) Location: NorCal |
Unfortunately, the FSM shows the use of dedicated tooling that few, if any, have...so this calls for some Yankee Ingenuity.
Personally, I use an H-frame press and an assortment of tubing scraps to press the bushings out and in. I'm sure others here have their pet methods that they can pass along. |
|
|
|
![](/forums/profile/get-photo.asp?memberid=140&type=profile&rnd=753) Expert 5K+
Posts: 9743
![5000](http://24.154.248.16/forums/images/decorations/multiple/5000.gif) ![2000](http://24.154.248.16/forums/images/decorations/multiple/2000.gif) ![2000](http://24.154.248.16/forums/images/decorations/multiple/2000.gif) ![500](http://24.154.248.16/forums/images/decorations/multiple/500.gif) ![100](http://24.154.248.16/forums/images/decorations/multiple/100.gif) ![100](http://24.154.248.16/forums/images/decorations/multiple/100.gif) ![25](http://24.154.248.16/forums/images/decorations/multiple/25.gif) Location: So. Cal | Large 1/2" drive socket sets are really useful for this purpose because they come in a wide assortment of sizes, and you can use the extensions to make them longer, like an erector set. ![](http://24.154.248.16/forums/images/emoticons/laugh.gif)
(58Coronet UCA Press.jpg)
Attachments ----------------
58Coronet UCA Press.jpg (111KB - 72 downloads)
|
|
|
|
![](/forums/profile/get-photo.asp?memberid=9187&type=profile&rnd=115) Regular
Posts: 71
![25](http://24.154.248.16/forums/images/decorations/multiple/25.gif) ![25](http://24.154.248.16/forums/images/decorations/multiple/25.gif)
| Thanks for the replies Phil |
|
|