Rick,Rock Auto Parts on line. 4 different kits, very good prices. If everything else works, I would pull the valve body first. The spools have very tight tolerances, a little grit can prevent them from shifting.You do not need to pull trans to service valve body, pull the pan, you will be looking at it. If you need more info, ask.GaryHi all,Can anyone recommend a source for a rebuild kit for an F? Autoplicity as recommended by Frank doesn't have one and I have tried Then and Now Automotive for a week and no one has ever answered the phone or returned an email. ThanksRick--On Mon, May 5, 2025 at 1:47 PM Rick Gould <rdg123@xxxxxxxxx> wrote:Hi all,--Thanks to Dave and Nick for educating me on the crossover plates used on the long rams.My fuel pump is not picking up fuel. Is this serviceable or should I replace it? ThanksRick Gould
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CAHuBk%2BMB_9ZS2S3w%2BEEDhcqMAK3t9KAsxR03V1R8CUnsyPk57g%40mail.gmail.com.
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CAHuBk%2BPm7B%2BgbriS5Mtrab9CrwJeTADTOQQifJ1Tzsjv7A6SYw%40mail.gmail.com.